Ways of use, application and handling

When you first use it, it is necessary to catalyze the combustible tanks with the required dose, based on the volume of fuel to treat.

It takes approximately eight hours to act at a 100% dissolving SKIMS, HC INCRUSTATIONS EXISTING IN TANKS, PIPES, PUMPS AND INJECTION SYSTEMS. It cleans them over time and it depends on the thickness of the fouling.

The CATALYZER should be added at the time of filling up the tanks. The agitation produced when filling it facilitates the spreading of the granules acting faster on the fuel.

It is important to change the air-fuel mixture, decreasing the volume of fuel being injected until the temperature required to match the existing working conditions, whether by carburetion of internal combustion engines or adjusting the burners in boilers and furnaces.

Initially, when used in industrial boilers and furnaces, you will notice an increase in smokes from the chimney, due to the detachment of the accumulations of soot, in the internal components of the boiler. When the formed deposits disappear, emissions will decrease dramatically, disappearing completely with a proper carburetion.

It is convenient to continue applying the CATALYZER not to lose its benefits. The CATALYZER should be stored in dry, cool places, in an airtight container and with the lid tightly closed, because it reacts with air spreading its intense aroma. (if stored in accordance with the specifications and it is handled while putting it in the tank), it is not flammable at room temperature, it is not water soluble.

WARING: This product contains Naphthalene as an active Ingredient. Short term exposure, Inhalation, Ingestion , or dermal contact with Naphthalene Is associated with hemolytic anemia, damage to the liver, and neurological damage Please store in a ventilated area at all times.